Manufacturer′s PTFE 2041f Tape Synthetic Polymer Resin Rod and Hose

• Customization: Available
• CAS No.: Qfreon
• Formula: Qfreon
• Model NO.: Ptfe powder 2041
• EINECS: Qfreon
• Color: White Powder
• Type: Synthetic Resin and Plastics
• Keywords: PTFE Sheet
• Product Name: PTFE
• Purity: 99.99
• Application: PTFE Gasket, Rod, Tube, Sheet, Bearings
• MOQ: 25
• Transport Package: 20kg
• Trademark: QFREON
• Origin: Zhejiang, China
• HS Code: 3904690000

Product Description

 

 

ltem	unit	DF-2041F
Appearance	/	Translucent particle, scrap metal, sand and other impurities cannot be mixed, particles with visible dark spots cannot exceed 2%
Bulk Density,g/l	/	475±100
Tensile strength,≥	Mpa	25.0
Elongation at break,≥	%	300
Relative density	/	2.145-2.175
Moisture Content,%≤	%	0.030
Average Particle SIze	/	400-575
Extrusion Pressure,Mpa	Mpa	50.0-75.017001
Hot stress crack resistance	/	- -

Polytetrafluoroethylen (PTFE), commonly known as "the king of plastics", is a polymer compound formed by the polymerization of tetrafluoroethylen. Insulation and good resistance to aging. Used as engineering plastics, can be made into PTFE tube, rod, tape, plate, film, etc. Generally used in corrosion-resistant pipes, containers, pumps, valves, radars, high-frequency communication equipment, and radio equipment with high performance requirements.
Processing method   Molding
Main Application
The resin are mainly used as insulating film for electric, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal ring, and loop etc
Package, transportation and storage
1). PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.20kg/barrel. On the barrel, there should be attached label and quality certificate.
2). PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc, foreign maters.
3). The product are transported according to non-dangerousproducts.
Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together.